SMT Reflow Oven Conveyor Hot Air Cheap Small T5L Soldering Machine

Product Detail

T-5L non-detachable structure reflow oven worked with hot wind to solder PCB, support most normal components, LED and kinds of IC.

Features:

1. Five heating zones can make inside temperature more accurate and well-proportioned, just need 15-20mins to reach the working temperature.

(First:Fast preheat zone Second:Soldering zone Third:Drying zone Fourth/Fifth:Bottom-side heat zones)

2. Using AC motor to drive the conveyor belt, chain type transmission way. Speed adjustment is controlled by automatic electronic analog switch, which sensitivity no more than 1 degree,control accuracy ±10mm/min.

3. Support working under both single Phase(220V)and Three phases(380V),suit both lead or lead-free solder paste

4. Cooling fan:Mainly to cool the welded PCB,or cool the heat parts inside machine to guarantee their good work.

5. Signal lights:Supervise the work condition of the machine, that is,signal lights indicate the temperature of the machine in normal and abnormal working state .

6. Emergency Stop Button-Support Abnormal Shutdown during breakdown situation

7.Support adjust the height of the base,which is convenient to build a Complete Automatic SMT Production Line with other SMT Machines

Parameter:

Length*Width*Height (mm)	1700×700×1280
Peak Power(KW)	7
Working Power(KW)	3
Input Voltage(V)	220/380
Conveyor Width(mm)	300
Standard Max Height (mm)	20
Customized Max height(mm)	55
Max Speed of Conveyor (mm)	1200
Packing Size	190*70*128CM
Gross Weight	220KG